
You can now buy BOAT Magic directly from our Facebook page.
Like our page on Facebook to stay up to date on industry news, sales, products, and how to use videos.
Buy BOAT Magic on Facebook!
He received a quart sample from the boat show in New York City and came into the marina looking for more. (The one quart cleaned his whole boat.) The marina was not familiar with BOAT Magic but after listening to the customer, their interest was peaked. They said they are going to be doing their fall haul out (cleaning a high number of boats in prep for winter storage) and that they also have a small store where they sell products.
The marina manger said his employees do not like the competitor brand they currently use; it is harsh on equipment and has a strong odor. The manager was unaware of an alternative for cleaning hulls, and was excited to learn about BOAT Magic. He called BOAT Magic headquarters, ordered a sample, and will use it during the fall clean out to see if he likes it as much as his customers.
To learn more about BOAT Magic, please click here.
A: For one thing, it won’t burn your skin like generic muriatic or the other boat hull cleaners out there that have muriatic in them. Just make sure you don’t have any open cuts or anything. Also, it doesn’t have the awful odor or fumes that muriatic does. Overall, it’s easier to work with and works as good or better than the other stuff out there.
A: Muriatic isn’t a solvent, so the standard paint used as a finish on steel and fiberglass hulls should be ok. Bottom paint is a different story. Some bottom paints are designed to slowly wear off, which keeps barnacles and other things from sticking (it’s like how the layers of a bar of soap peel away over time). Muriatic can wash this kind of paint off. Hard bottom or non-ablative paint probably won’t come off with BOAT Magic, but it could leach the anti-fouling agents from the paint. Long story short, use it before you apply bottom paint.
Q: I saw something online that said muriatic acid will ruin galvanized steel? The label on Boat Magic says that it’s user friendly. Does that mean that it’s not going to hurt my trailer?
A: The bottle says it has muriatic acid in it and the label says it’s equal to full strength, so I wouldn’t test it. Muriatic acid does react with aluminum by removing the zinc coating on the trailer and making it more rust-prone. What you need to do is either cover your trailer with a tarp or make sure you rinse it off multiple times while you’re cleaning. If you let it sit too long you’re running the risk of a rust problem.
A: Check out the ‘how to use and FAQ’ link over on the right side of the page. It gives a pretty good list of the things it works best on. One thing they don’t recommend it on is light weight aluminum. Muriatic acid will react with the aluminum and make it look darker in spots. Worst case scenario, it’ll eat a hole in the aluminum if you leave it on there. Unless you’re going for the aged or worn-and-torn look, it’s probably not a good idea to use anything on your aluminum boat that has muriatic in it.
A: I wouldn’t if I were you. Even though it has stuff in it that cuts down the fumes and keeps it from burning your skin, it’s still muriatic acid. Muriatic lowers water pH, which isn’t good for the critters that live in the water. On top of that, the park rangers would be all over you if they saw you putting chemicals in their water! And as an FYI, it’ll lower the pH in plant soil too, so be careful and only wash your hull where runoff won’t get into gardens and flowerbeds.